我們提供XS到L的戒圍尺寸,請參考下列兩種測量方式,並對照CAJ戒圍表。

Chiao Jewellery’s handmade rings are available in sizes from XS to L. Please refer to the following two measurement methods below and check with our Ring Size Guide.

【現有戒指測量法 Measure with your own ring】

  1. 將直尺壓在戒指上,測量不含戒指厚度的內圈直徑。
  2. 對照CAJ Ring Size Guide,便能得到適合的戒圍號碼。 
  1. Place a ruler under the ring and measure the diameter of the inner ring.
  2. Refer to the CAJ Ring Size Guide, you will be able to find a suitable ring number.

內圈直徑diameter of the inner ring

 

童趣測量法 Fun measurement

  1. 將手平放紙上,畫出手的輪廓。(提醒:筆要和紙垂直)
  2. 用直尺量出 (a.)手指底部 和 (b.)手指關節 的寬度。
  3. 請重複測量,能得到更準確的平均值。
  + 可將六張測量照片傳給我們,因為手型的輪廓也是參考重點。我們將為你再確認一次!
     
  1. Place the hand flat on a piece of paper and draw the outline of the ring finger. (Note: the pen should be perpendicular to the paper.)
  2. Use a ruler to measure the width of the area in (a.) which you will wear the ring and (b.) the finger joint. 
  3. Please repeat the measurement again. And use the average of the results.
  + You can also send us the six measured photos, because the outline of the hand shape is also the reference point. We will help you to confirm again!
 

 

 

實體戒圍卡 CAJ Ring Size Card

如果以上方式皆不適用,只需負擔運費,我們免費提供 CAJ戒圍卡

Still Too complicated? Our reusable Ring Sizer is also available upon request! You only need to take care of the shipping fee, then we will send you the reusable Ring Size Card for an easier way to get an accurate measure.
戒圍卡 Sizing card
下載戒圍卡 Download CAJ Ring Card